Remote Control

The Reflex currently supports the SBUS protocol, so it is advised to use a remote controller that is compatible with SBUS. For example, the RC brands of FrSky and Futaba are commonly known to support SBUS.

Note: Support to other RC protocols will be added via software update in near future.

Channels

The default mappings are as follows:

• Roll : Channel 1,
• Pitch : Channel 2,
• Throttle : Channel 3,
• Yaw : Channel 4,
• Flight Mode Switch 1 (3-way switch) : Channel 5,
  • Low (Negative): Attitude mode.
  • Centre (Zero): Altitude mode.
  • High (Positive): Position mode.
• Flight Mode Switch 2 (3-way switch) : Channel 6,
  • Low (Negative): Not assigned.
  • Centre (Zero): Not assigned.
  • High (Positive): Mission mode.
• Arm/Disarm : Channel 7,
• Kill : Channel 8,
• Control Algorithm : Channel 9,

The live status of the remote control data can be seen in the web interface, by clicking View Live next to RC status on the dashboard.